HYDRO EXCAVATION – WET VACUUM RECOVERY UNIT

HYDRO EXCAVATION – WET VACUUM RECOVERY UNIT
Model: CAP COMBI 2600 CC 6×4
The unit is designed for hydro excavation, wash-down and wet vacuum recovery for water debris,
sludge, sand and similar materials.

Some of its features are: 

Tipping Sludge Body:
· capacity: 8,000 litres litres with inner stainless still liner
· Tank rear hinged and tipping by means of a dual action hydraulic cylinder equipped with a controlled safety valve to prevent the tank from falling by gravity.
· Tank tipping to approx. 40 degrees
· Tank equipped with a hydraulically operated rear door, hinged at the top and provided with an EPDM rubber seal to prevent leakage; closing by means of two dual action hydraulic cylinders; safety valve to prevent door from falling by gravity

Overhead Suction Hose Boom Arm
· Mounted on top of sludge tank (Mounted at rear of sludge tank, parked at front of sludge tank)
· 270° rotation arm, hydraulic telescoping and 60° lifting
· Boom extension from 3.8m to 4.8m from centre of tank

Hydro Excavation System
· High pressure pump 280 bar, 17 l/min
· Equipped with 20m x 3/8” hose

Water Tank
· capacity: 4,300 litres
· Concentric to sludge tank for optimal weight distribution

Aestec will supply 1 or 2 operators depending on requirements. Our Operators are fully inducted and experienced on all local Gladstone Sites (QAL, RTY, BSL, NRG, WICET, etc)

For enquires please contact head office
Call : 07 4970 9800
Email : enquiries@aestec.com.au